Drug safety
Drug recalls: Class I, II and III explained, and how to look them up
Drug recall lookup: what FDA Class I, II and III recalls mean under 21 CFR 7.3, how market withdrawals differ, and how to search FDA enforcement reports.
By the All In Biotech editorial team · Published November 18, 2026 · 6 min read
FDA sorts drug recalls into three classes by how much harm the product could cause. Class I is the most serious: a reasonable probability of serious adverse health consequences or death. Class II covers temporary or medically reversible harm, and Class III covers products unlikely to cause any adverse health consequences.
The definitions come from FDA's recall regulations at 21 CFR Part 7. This post sets out each class in FDA's own terms, explains the related terms market withdrawal and safety alert, and shows how to find recalls for a specific drug.
The three recall classes, as FDA defines them
Section 7.3 of the regulation defines recall classification as the numerical designation, I, II or III, that FDA assigns to a recall to indicate the relative degree of health hazard. The three classes are:
| Class | FDA definition (21 CFR 7.3) |
|---|---|
| Class I | A situation in which there is a reasonable probability that the use of, or exposure to, a violative product will cause serious adverse health consequences or death. |
| Class II | A situation in which use of, or exposure to, a violative product may cause temporary or medically reversible adverse health consequences or where the probability of serious adverse health consequences is remote. |
| Class III | A situation in which use of, or exposure to, a violative product is not likely to cause adverse health consequences. |
A few points follow from the wording.
- The class describes the hazard, not the size of the recall. A Class III recall can involve millions of units, and a Class I recall can involve a single lot.
- The class is about the product as distributed, so the same drug can have recalls in different classes over the years.
- A "violative product" is one FDA considers to be in violation of the laws it administers. Common reasons in drug recalls include contamination, failed potency or dissolution tests, wrong labeling, and manufacturing practice problems.
Who classifies a recall
Recalls are usually started by the company. FDA's recalls background and definitions page notes that a recall may be conducted on a firm's own initiative, at FDA's request, or by FDA order under statutory authority.
The class is set by FDA, not by the firm. The agency evaluates the health hazard, considering factors such as whether illness or injury has already occurred, how vulnerable the exposed population is, and how serious and likely the harm would be. Until that review is done, a recall can appear as not yet classified.
The regulation also asks firms to set a recall strategy, including the depth of the recall: whether it reaches wholesalers, retailers, or consumers and users. A Class I recall is more likely to go to the consumer level, but depth is decided case by case.
Market withdrawals, stock recoveries and safety alerts
Several related actions are not recalls under the regulation:
- Market withdrawal. Under 21 CFR 7.3, a firm's removal or correction of a distributed product that involves a minor violation that would not be subject to legal action by FDA, or that involves no violation at all. Normal stock rotation practices are an example the regulation itself gives.
- Stock recovery. A firm's removal or correction of a product that has not been marketed or has not left the firm's direct control.
- Safety alert. In FDA's usage this term mainly applies to medical devices: a communication issued where a device may present an unreasonable risk of substantial harm. For drugs, FDA's urgent safety messages usually take the form of Drug Safety Communications and label changes rather than recalls.
FDA lists recalls, market withdrawals and safety alerts together on its Recalls, Market Withdrawals, and Safety Alerts page, which mostly shows company press announcements. The formal record of classified recalls is the Enforcement Report.
Recall status: ongoing, completed, terminated
Each recall in FDA's records also carries a status:
- Ongoing: the recall is in progress.
- Completed: the firm reports that it has finished the recall actions.
- Terminated: FDA has determined that all reasonable efforts have been made to remove or correct the product, and closes the recall.
When this site queried the openFDA drug enforcement API in November 2026 (data last updated November 11, 2026), it held 18,166 drug recall records: 1,753 Class I, 14,688 Class II, 1,723 Class III and 2 not yet classified. By status, 14,842 were terminated, 2,901 ongoing and 423 completed. These are product records, and one recall event often covers several products or lots, so the totals overstate the number of separate recall events.
How to look up recalls for a drug
FDA Enforcement Report
FDA publishes the Enforcement Report every week. It lists every recall FDA has classified, across drugs, devices, food and biologics. You can search by product type, product description, firm, class and date. Each record shows the reason for recall, the lots, the distribution pattern and the quantity.
openFDA
The same drug records are available through openFDA. The API is useful for counts and for tracking a firm or ingredient over time. openFDA notes that its data are not validated for clinical decisions.
This site
Each drug page on All In Biotech shows the openFDA enforcement records linked to that application, with class and status, next to the approval history, label and any shortages.
Matching recalls to applications depends on the application number in the record. Some recalls, especially for compounded or unapproved products, have no application number and will not appear on a drug page. The Enforcement Report is the place to search for those.
Reading a recall record
When you open a record, these fields carry the most information:
- Classification: Class I, II or III.
- Reason for recall: often the most useful field, for example a failed impurity test or a labeling mix-up.
- Product description and lots: the strength, package and lot numbers affected. Other lots of the same drug are not part of the recall.
- Distribution pattern: nationwide, certain states, or export.
- Recall initiation date and report date: the initiation date is when the firm started; the report date is when it appeared in the Enforcement Report.
- Status: ongoing, completed or terminated.
A recall of one lot does not mean the drug has been withdrawn from the market. A full withdrawal of an approved drug for safety reasons is a separate regulatory process and shows up in Drugs@FDA as a change in marketing status.
Recall versus shortage
A recall and a shortage are different events. A recall removes or corrects a product that violates FDA requirements. A shortage is a supply problem, defined by law as a period when demand exceeds supply. A large recall can lead to a shortage if it removes enough product, and FDA weighs shortage risk when it works with firms on a recall. Most shortages, though, come from manufacturing problems, discontinuations or demand.
For how to check shortage status, see how to check whether a drug is in shortage. For adverse event reports, which are a third and separate source of safety information, see how to search FAERS.
What a recall record does not tell you
Recall data describes the product problem and what the firm is doing about it. It does not say whether a specific person was harmed or what anyone holding a recalled product should do. FDA's recall announcements and the firm's notice usually include instructions, and pharmacists and prescribers can advise on individual situations.
FDA's drug recalls page links to current drug recall announcements. Because new recalls are classified every week, check the Enforcement Report for the latest records rather than relying on any saved list.
Frequently asked questions
- What is a Class I drug recall?
- Under 21 CFR 7.3, a Class I recall is a situation in which there is a reasonable probability that using or being exposed to the product will cause serious adverse health consequences or death.
- Who decides the recall class?
- FDA assigns the class after evaluating the health hazard the product presents, which is why a recall can appear in the Enforcement Report as not yet classified.
- What is the difference between a recall and a market withdrawal?
- A market withdrawal is a firm's removal or correction of a product with a minor violation that would not be subject to FDA legal action, while a recall involves a product FDA considers in violation of the law.
- Where can I look up drug recalls?
- FDA's weekly Enforcement Report lists every classified recall, and the same data is available through the openFDA drug enforcement API and on this site's drug pages.
For information only, not medical, legal or investment advice. Facts about FDA and CMS programs are current as of the publication date; check the linked official source for changes.